Skip to content
REVENS3D STUDIO
← ALL SERVICES

/ SERVICE · 00

3D Printing

Printing a figure starts long before the printer: wall thickness, hollowing, supports, keys and material shrinkage. I prepare third-party models for printing, produce on a resin printer, and finish parts to a “ready to prime and paint” state.

/ What's included

  • Model check and repair for printing
  • Orientation, supports, hollowing
  • Resin printing (resolution down to 0.02 mm)
  • Post-processing: wash, UV cure, support removal
  • Sanding and defect fixing
  • Priming — optional

/ Process

  1. Model

    You send a file (STL/OBJ) or we sculpt it ourselves.

  2. Preparation

    Thickness check, orientation, supports, slicing.

  3. Printing

    Resin printing and layer quality control.

  4. Post-processing

    Wash, cure, sanding. Parts ready for painting.

A resin 3D printer printing figure parts
A resin 3D printer printing figure parts

/ Tools

  • Resin printer
  • UV cure station
  • Chitubox
ORDER THIS SERVICE

FAQ

FAQ

What material is used?

Photopolymer resins: standard, clear, and impact-resistant — chosen per the task.

Maximum print size?

About 200 mm on the longest side. Larger models are cut into keyed parts for assembly.

Do you print third-party models?

Yes, if you have the rights to the model. File check and preparation are part of the job.